Automatic laser cutting machine

Product Item : JSD-G6025-R
Category： Laser equipment
Multipurpose laser cutting machine
Automatic laser cutting machine
Thin film material laser cutting machine
Non metallurgical tool splitting machine
INQUIRY EMAIL

Suitable for processing various types of circular pipes with a diameter less than 15, as well as some products with high precision requirements. Wide range of processing materials, capable of processing multiple materials such as stainless steel, iron, copper aluminum alloy, etc. This machine is optimized for the needs of the medical industry and can process various types of pipe fittings used in medical devices.
The cutting heat has little impact, the deformation of the board is small, and the cutting seam is 0.05.
Low processing accuracy, good repeatability, and no damage to the material surface. Accuracy 0.03mm.

Automatic laser cutting machine

Maximum power of laser	1000W2000W3000W
Laser wavelength	1070±10nm
Maximum positioning speed	60m/min
Maximum acceleration	0.5g
Cutting speed	Depending on the thickness of the material
Maximum cutting thickness	<3mm<4mm<6mm (stainless steel plate)
Minimum line width	0.05-0.15mm
X/Y axis positioning accuracy	±0.03mm
X. Y-axis repeat positioning accuracy	±0.03mm
Rotation axis positioning accuracy	5 arc-sec
Processing scope	Continuous processing: diameter ≤ 25mm, length ≤ 3 meters
Single piece processing	Diameter ≤ 25, length ≤ 300mm circular (requires fixture)
Machine weight	Less than 1400KG
Whole machine power	<8Kw<10Kw<14Kw
working voltage	AC 220V 50Hz/60HzAC 380V 50Hz/60Hz